Call us on FREEPHONE 0800 888 324

View product

Viewtech 7" Digital LCD Heavy Duty Reversing System


Images: Click to view

NZ$ 649.95

This is our most common kit by far.   Extremely high quality equipment with bright monitor and high resolution.

Heavy Duty & Long Lasting

The Viewtech 7" Monitor is a high quality shock resitant digital monitor built for conditions associated with vehicles.  It comes with sturdy mounts and brackets and all connetions are made via a wiring loom which can be fully hidden.   The heavy duty camera is also buit to last.  Made out of cast aluminium it can handle the odd knock or two and it has a built in heater to prolong its life.  This keep moisture out and means you will never have to put up with a foggy image.

Easy To Install

This kit is incredibly easy to install.  All electrical contacts are done at the monitor end which includes the red '+' & black '-' connection and a third reverse light sense wire which is optional if you would like the system to power up when reverse is selected.   All camera connections are done out of the monitor via ONE 4-pin cable.  This makes installation very straight forward and a lot easier than you think.

Versatile

This system is very versatile and can be installed in any bus, truck or other vehicle. For 5th wheelers and trailer units an optional trailer coupler is also available. System is powered from 12V-24V-32V and all cables are screw connections which are all waterproof.   Powering to the cameras is done automatically by the monitor regarless of the input voltage.

 

Features:

  • Four video inputs. Three via the rear cabling bundle and one via the front jack
  • Hi resolution digital monitor with superior brightness
  • automatic defrosting and demisting. (heater kicks in when temperature drops below 10 degrees)
  • 160o wide camera viewing angle
  • Each rear input also has a 12V output.
  • Each rear input has a power sensing wire which when taken to a postive voltage will automatically select that view (door view, reversing camera etc)
  • 12V-32V dynamic voltage input range
  • infrared camera with 5m viewing range in pitch black.
  • versatile mounting options for both camera and monitor.

Monitor Specifications:

Screen7" Digital LCD Wide angle view
Audio1W Built in speaker
Colour SystemPAL
Power Supply12V-32V DC
Outer Dimensions

182mm(W) x 122mm(H) x 26mm(D)

Dot Pitch0.107h x .37v
Resolution800 x 480
Contrast Ratio500:1
Brightness400cd/m2
Power Consumption12W

 

Camera Specifications:

Resolution420 TVL or 512 x 582 pixels.
Image SensorSharp 1/3" CCD
Colour SystemPAL
Min Illumination0.0Lux
Video Output1.0Vp-p 75 Ohms
Electronic Shutter1/50 to 1/100000 sec
AGCAuto
Signal to Noise Ratio>48dB
White BalanceAuto
Voltage12V DC
Current400mA max
Size86 x 72 x 75
Cable Length included.300mm

Included:

  • monitor
  • heavy duty camera
  • 20m cable
  • wiring loom
  • dash mount
  • infrared remote control
  • bracket mount
  • sun visor
  • manual
  • 1 x RCA cable adaptor
  • 1 x Front input jack RCA adaptor


You may also be interested in:
Viewtech 7" Digital LCD Reversing System
Versatile and easy to install this system is heavy duty and designed for any large vehicle.
NZ$ 629.96
Heavy Duty Flush Mount Camera
Sharp CCD, 420TVL
NZ$ 199.95