Planet 16 Port POE Switch

SKU: PGSW-1600HP

Quick Overview

16 x PoE+ Ports. Total power 220W.

Perfect Integrated Solution for PoE IP Surveillance
The GSW-1600HP brings an ideal secure surveillance system at a lower total cost. The GSW-1600HP provides 16 10/100/1000Mbps 802.3at PoE port able to feed sufficient PoE power for 16 IEEE 802.3af / IEEE 802.3at PoE IP cameras at the same time. It is also able to connect with one 16-Channel NVR or two 8-Channel NVR systems, uplink to backbone switch and the monitor center. With such high performance switch architecture, the recorded video files from the PoE IP Cameras can be saved in the NVR system via which the administrators can control and monitor the surveillance images both in the local LAN and the remote sites.

Energy-Saving Design
The GSW-1600HP uses new engine that incorporates two advanced Green Networking technologies:
 ■ Idle Mode Link Down power saving
 ■ Intelligent Scales Power based on cable length
The Idle mode Link Down power saving of the GSW-1600HP complies with Pre-IEEE 802.3az Energy Efficient Ethernet (EEE) standard to automatically lower power for a given port when it is not linked. The Intelligent Scales Power technology actively determines the appropriate power level based on the cable length. When connecting to the GSW-1600HP with Ethernet cable shorter than 20m, a device can obtain maximum power saving because the GSW-1600HP would automatically detect the Ethernet cable length and reduce power usage. The connected device can substantially reduce overall power consumption, which makes a significant contribution to energy saving.

Easy Installation & Cable Connection
Providing data transfer and High Power PoE in one unit, the GSW-1600HP is able to reduce the need of extension cables and dedicated electrical outlets on the wall, ceiling or any unreachable place. It helps to lower the installation costs and simplify the installation effort. All RJ-45 copper interfaces of the GSW-1600HP supports 10/100/1000Mbps auto-negotiation for optimal speed detection through RJ-45 Category 6, 5 or 5e cables. It also supports standard auto-MDI/MDI-X that can detect the type of connection to any Ethernet device without requiring special straight or crossover cables.

Interface

  • 16-Port 10/100/1000Mbps Gigabit Ethernet RJ-45 ports
  • Each port supports 52V DC power to PoE Powered Device

Power over Ethernet

  • Complies with IEEE 802.3af / IEEE 802.3at Power over Ethernet
  • Up to 16 IEEE 802.3af / IEEE 802.3at devices powered
  • Supports PoE Power up to 30 Watts for each PoE port
  • Auto detect powered device (PD)
  • Circuit protection prevents power interference between ports
  • Remote power feeding up to 100m

Switching

  • Hardware based 10/100/1000Mbps auto-negotiation and auto MDI/MDI-X
  • Flow control for full duplex operation and back pressure for half duplex operation
  • Integrates address look-up engine, supporting 8K absolute MAC addresses
  • 9K Jumbo Frame supports at all speed (10/100/1000Mbps)
  • Automatic address learning and address aging
  • Supports Pre-Energy-Efficient Ethernet (EEE) function (IEEE 802.3az)

Hardware

    • 19-inch desktop size, 1U height
    • LED indicators for PoE ready and PoE activity
    • Ethernet Link Energy-Saving technology
    • - Link down power saving- Intelligent scales power based on cable length
Hardware Specification
Network Port 16 10/100/1000Base-T auto-MDI/MDI-X RJ-45 ports
PoE Inject Port 16-Port with 802.3af / 802.3at PoE injector function
LED Display System
 Power (Green)
PoE Ethernet Interfaces 
 PoE In-Use (Orange)
10/100/1000Base-T Ports 
 1000 (LNK/ACT, Green), 10/100 (LNK/ACT, Orange)
Switch Architecture Store and Forward switch architecture
MAC Address 8K MAC address table with auto learning function
Switch Fabric 32Gbps
Switch Throughput 23.8Mpps@64Bytes
Jumbo Packet Size 9K Bytes
Flow Control Back pressure for half-duplex. IEEE 802.3x pause frame for full-duplex
Power Requirements AC 100~240V, 50/60Hz, 3.5A max.
Power Consumption Max. 260 watts / 885 BTU
Dimensions (W x D x H) 445 x 207 x 45 mm (1U height)
Weight 2.54kg
Power over Ethernet
PoE Standard IEEE 802.3af Power over Ethernet / PSE
IEEE 802.3at Enhancement Power over Ethernet / PSE
PoE Power Output Per Port 52V DC, 300mA. max. 15.4 watts (IEEE 802.3af)
Per Port 52V DC, 590mA. max. 30 watts (IEEE 802.3at)
PoE Power Budget 220 watts
Number of PD, 7Watts 16
Number of PD, 15.4Watts 14
Number of PD, 30.8Watts 7
Environment
Operating environment 0 ~ 50 degrees C
Storage environment -40 ~ 70 degrees C
Operating Humidity 5 ~ 95%, relative humidity, non-condensing
Storage Humidity 5 ~ 95%, relative humidity, non-condensing
Standard Conformance
Standard Compliance
IEEE 802.3
IEEE 802.3u
IEEE 802.3x
IEEE 802.3af
IEEE 802.3at
IEEE 802.3az
Ethernet
Fast Ethernet
Flow Control 
Power over Ethernet
Enhanced Power over Ethernet
Pre-Energy-Efficient Ethernet
Regulation Compliance FCC Class A, CE
 
Ordering Information
GSW-1600HP 16-Port 10/100/1000Mbps 802.3at PoE+ Ethernet Switch
 
 

You may also be interested in the following product(s)

Product Attachments

View FilePlanet 16 Port PoE Switch    Size: (850.12 KB)

Data Sheet

View FilePlanet 16 Port PoE Switch    Size: (1.81 MB)

User Manual