Planet Ethernet Over Coax Converter

SKU: PVC202AAU

$189.00 +GST

Quick Overview

1-Port 10/100Base-TX + 1-Port BNC Ethernet over Coaxial Extender

PLANET VC-202A is a high-performance Ethernet-over-Coaxial extender that converts between twisted pair (UTP) and coaxial cable for every kind of IP Ethernet application.

It offers the absolutely fastest data transmission speed over existing coaxial cable without the need of rewiring. On the UTP side, the VC-202A uses a modular EIA / TIA 568 RJ-45 connector that supports CAT-5/5e or above wiring with the distance up to 100 meters (328 feet). On the coaxial cable side, the VC-202A utilizes a BNC connector that supports 50ohm or 75ohm coaxial cable with the distance up to 3km. 

It is ideal for extending the distance and signal conversion by transmitting the Ethernet data from the coaxial cable for any type of IP network device such as IP camera, wireless access point, NVR and digital signage.

  • Defines Asymmetric (Plan 998) and Symmetric for the transmission of upstream and downstream signals
  • Cost-effective Profile 17a CO / CPE bridge solution
  • One box design, CO / CPE selectable via DIP Switch
  • Complies with IEEE 802.3, IEEE 802.3u and IEEE 802.3x standards
  • DMT (Discrete Multi-Tone) line coding • Half duplex back-pressure and IEEE 802.3x full duplex pause frame flow control
  • Supports up to 1,536 bytes packet size, IEEE 802.1Q VLAN tag transparent
  • Standalone transceiver for simple bridge modem application
  • Advantage of minimum installation time (simply by Plug-and-Play) • Selectable target band plan and target SNR margin
  • Supports extensive LED indicators for network diagnostics
  • Co-work with PLANET MC family Media Chassis (MC-700 / 1500 / 1500R / 1500R48)
  • Compact in size, easy installation
Hardware Specifications
Ports • 10/100Base-TX: 1 RJ-45, auto-negotiation and auto-MDI / MDI-X
• Coaxial: 1 BNC, female connector
DIP Switch 4 position DIP switch
Functionality • CO / CPE mode select
• Selectable fast and interleaved mode
• Selectable target Band Plan
• Selectable target SNR mode
Encoding •DMT (Discrete Multi-Tone) line coding
 - ITU-T G.997.1
 - ITU-T G.993.1
 - ITU-T G.993.2 (Profile 17a Support)
LED Indicators • One Power
• 3 for Coaxial (BNC):
 - Green, LNK
 - Green, CO mode
 - Green, CPE mode
• 2 for per RJ-45 10/100Base-TX port
 - Green, LNK / ACT
 - Green, Speed
Cabling • Ethernet : 10Base-T: 2-pair UTP Cat.3, 4 and 5 up to 100m (328ft)
• Ethernet : 100Base-TX: 2-pair UTP Cat.5, 5e and 6 up to 100m (328ft)
• Coaxial Cable: 50ohm, RG58A / U, RG58C / U, RG58 / U or equivalent; 75ohm, RG-6 (Distance up to 3.0km)
Performance Asymmetric:
 200m ->100/65Mbps
 400m ->100/64Mbps
 600m ->100/59Mbps
 800m ->100/53Mbps
 1000m -> 94/44Mbps
 1200m -> 84/36Mbps
 1400m -> 74/28Mbps
 1600m -> 66/19Mbps
 1800m -> 60/14Mbps
 2000m -> 44/15Mbps
 2200m -> 35/12Mbps
 2400m -> 32/10Mbps
 2600m -> 29/8Mbps
 2800m -> 27/6Mbps
 3000m -> 25/5Mbps

Symmetric:
 200m ->99.7/100Mbps
 400m ->100/100Mbps
 600m -> 86/91Mbps
 800m -> 79/80Mbps
 1000m -> 69/66Mbps
 1200m -> 60/52Mbps
 1400m -> 51/41Mbps
 1600m -> 45/36Mbps
 1800m -> 40/29Mbps
 2000m -> 27/26Mbps
 2200m -> 23/24Mbps
 2400m -> 22/21Mbps
 2600m -> 20/18Mbps
 2800m -> 18/15Mbps
 3000m -> 17/13Mbps
Dimensions (W x D x H) 97 x 70 x 26 mm
Weight 0.2 kg
Power Requirements 5V DC 2A
Power Consumption 6.3 watts / 21BTU (maximum)
Standard Conformance
Regulation Compliance FCC Part 15 Class A, CE
Standards Compliance IEEE 802.3 10Base-T
IEEE 802.3u 100Base-TX
IEEE 802.3x full duplex pause frame flow-control
ITU-T
 - G.993.1
 - G.997.1
 - G.993.2 (Profile 17a Support)
Environment
Operating Temperature: 0 ~ 50 degrees C
Humidity: 5~90%, relative humidity (non-condensing)
Storage Temperature: -10~70 degrees C
Humidity: 5~90%, relative humidity (non-condensing)
* The actual data rate will vary on the quality of the copper wire or coaxial cable and environment

You may also be interested in the following product(s)