This is our most common kit by far for buses, trucks and motor homes.

Heavy Duty & Long Lasting

The Viewtech 7" Monitor is a high quality shock resitant digital monitor built for conditions associated with vehicles.  It comes with sturdy mounts and brackets and all connections are made via a wiring loom which can be fully hidden.   The heavy duty camera is also built to last.  Made out of cast aluminium it can handle the odd knock or two and it has a built in heater to prolong its life, this keeps moisture out and means you will never have to put up with a foggy image.  The camera is also IP69K rated meaning that it can be pressure washed at high temperature.

Connections to cameras are all made via waterproof 4-pin screw type connections and the camera also comes with a rubber cable shroud and gromet for entry through an external surface. 

Wide Dynamic Input Voltage Range

Features well designed DC circuitry primarily designed for 24V systems.  A wide 10V-36V input range to handle voltage drops and spikes.   Each camera output has smoothed 12V supply for perfect camera operation.

Easy To Install

This kit is incredibly easy to install.  All electrical contacts are done at the monitor end which includes the red '+' & black '-' connection and a third reverse light sense wire which is optional to connect if you would like the system to power up when reverse is selected.   All camera connections are done out of the monitor via ONE 4-pin cable.  This makes installation very straight forward and a lot easier than you think.

Versatile

This system is very versatile and can be installed in any bus, truck or other vehicle. For 5th wheelers and trailer units an optional trailer coupler is also available. System is powered from 12V-24V-32V and all cables are screw connections which are all waterproof.   Powering to the cameras is done automatically by the monitor regardless of the input voltage.

Included:

• monitor
• heavy duty camera ( black or white selectable)
• 20m cable
• wiring loom
• dash mount
• infrared remote control
• flush bracket mount - for mounting flush into panels.  Picture shown. 
• sun visor
• manual
• 1 x RCA cable adaptor
• 1 x Front input jack RCA adaptor

Features:

• Use for reversing or for watching traffic behind vehicle
• IP69K rated camera (can be pressure washed)
• Four video inputs. Three via the rear cabling bundle and one via the front jack
• Hi resolution digital monitor with superior brightness - 400mcd brightest on the market
• Hi resolution CCD colour camera with infrared night vision and audio
• automatic defrosting and demisting. (heater kicks in when temperature drops below 10 degrees)
• 160^o wide camera viewing angle
• Each rear video input also has a 12V output.
• Each rear video input has a power sensing wire which when taken to a postive voltage will automatically select that view (door view, reversing camera etc)
• 10V-32V dynamic voltage input range. Handles spikes and volt drops experienced in a 24V system.
• versatile mounting options for both camera and monitor.
• monitor button lights automatically illuminate in the dark

Below are the files you can download

• Data Sheet