Now with new cyrstaline LEDs for even better night vision!
The Viewtech SV7HD20 reversing system is a fit for purpose hard wearing reversing or monitoring camera system. It is designed for industrial and heavy transport applications where safety and equipment reliability is paramount. If required the SV7HD20 has a 100% duty cycle and can be left on 24/7 if required. It can be left on to monitor areas of hazard or can be automatically triggered by reversing or indicator lights or any other electrical trigger. If you have tried a cheaper system and now need something better this is the one for you, if you are in the market for a new system save yourself some money and buy good quailty to start with.
Customer using these include Fulton Hogan, Downer, HEB, Port Companies and Kiwi Rail.
24 Month Warranty
We back our products 100%. This product comes with a 24 month full replacment warranty. If your camera or monitor fails within 24 months due to manufacturing defect or faulty component we replace it with a new one.
Heavy Duty & Long Lasting
The Viewtech 7" Monitor is a high quality shock resitant digital monitor built for conditions associated with vehicles. It comes with sturdy mounts and brackets and all connections are made via a wiring loom which can be fully hidden. The heavy duty camera is also built to last. Made out of cast aluminium it can handle the odd knock or two and it has a built in heater to prolong its life, this keeps moisture out and means you will never have to put up with a foggy image. The camera is also IP69K rated meaning that it can be pressure washed at high temperature. We have this camera fitted with a high quality 700TVL low lux image sensor and this is combined with a mechanical IR filter. These two together provide an extremly crisp day time imgage and a superior night vision image in pitch black conditions.
Connections to cameras are all made via waterproof 4-pin screw type connections and the camera also comes with a rubber cable shroud and gromet for entry through an external surface.
Wide Dynamic Input Voltage Range
Features well designed DC circuitry primarily designed for 24V systems. A wide 10V-36V input range to handle voltage drops and spikes. Each camera output has smoothed 12V supply for perfect camera operation.
Easy To Install
This kit is incredibly easy to install. All electrical contacts are done at the monitor end which includes the red '+' & black '-' connection and a third reverse light sense wire which is optional to connect if you would like the system to power up when reverse is selected. All camera connections are done out of the monitor via ONE 4-pin cable. This makes installation very straight forward and a lot easier than you think.
True Day / Night Imaging
The Viewtech VT639HD camera included with this kit has a special day/night lens. This lens uses a special filter to automatically filter out colour distorting IR during the day but then at night alternates to produce crystal clear infrared night vision image. This creates perfect day time colour and incredibly clear night vision.
This system is very versatile and can be installed in any bus, truck or other vehicle. For 5th wheelers and trailer units an optional trailer coupler is also available. System is powered from 12V-24V-32V and all cables are screw connections which are all waterproof. Powering to the cameras is done automatically by the monitor regardless of the input voltage.
- heavy duty camera ( black or white selectable)
- 20m cable
- wiring loom
- dash mount
- infrared remote control
- flush bracket mount - for mounting flush into panels. Picture shown.
- sun visor
- 1 x RCA cable adaptor
- 1 x Front input jack RCA adaptor
As Viewtech systems are fit for purpose and fully customizable we do our best to provide accessories that suite a wide range of requirements. These accessories include trailer coupling units, over head mounts and loom extension. The Viewtech VT13P loom extension allows our monitors to be mounted overhead while keeping the wiring harness installed below.
- use for reversing or for watching traffic behind vehicle
- high resolution 500TVL camera with smart IR
- IP69K rated camera (can be pressure washed)
- four video inputs. Three via the rear cabling bundle and one via the front jack
- hi resolution digital monitor with superior brightness - 400cd/m2 brightest on the market
- hi resolution colour camera with infrared night vision and audio
- true day/night infrared filter for ultra clear night time imaging
- automatic defrosting and demisting. (heater kicks in when temperature drops below 10 degrees)
- 160° wide camera viewing angle
- each rear video input also has a 12V output for powering cameras / devices.
- each rear video input has a power sensing wire which when taken to a postive voltage will automatically select that view (door view, reversing camera etc)
- 10V-32V dynamic voltage input range. Handles spikes and volt drops experienced in a 24V system.
- versatile mounting options for both camera and monitor.
- monitor button lights automatically illuminate in the dark
|Screen||7" Digital Panel with extra wide angle view|
|Camera inputs||3 (each with audio and 12V power output) Camera input 3 has reverse grid overlay|
|Camera Triggers||3 (10V-36V trigger for activating camera)|
|DVD/Aux input||1 (on front)|
|Colour System||PAL/NTSC Auto|
|Power Supply||10V-32V DC|
|Outer Dimensions||182mm(W) x 122mm(H) x 26mm(D)|
|Dot Pitch||0.107h x .37v|
|Resolution||800 x 480|
|Button Lights||Auto illuminating|
|Resolution||500 TVL or 512 x 582 pixels.|
|Min Illumination||0.0Lux with smart IR (IR ouput power automatically adjusts to correctly expose image)|
|Heater||Built in Heater for demisting/fogging and cold usage.|
|Colour System||PAL/NTSC Auto|
|Infrared||Automatic Day/Night mode 5m Illumination|
|Audio||Yes (sensitive microphone built in)|
|Video Output||1.0Vp-p 75 Ohms|
|Electronic Shutter||1/50 to 1/100000 sec|
|Signal to Noise Ratio||>48dB|
|Voltage||12V DC (Voltage is converted by monitor is using 24V System)|
|Size||86 x 72 x 75|