Planet 802.3af/at to Passive PoE Converter


$49.00 +GST

Quick Overview

Use 802.3af/at POE for non 802.3af/at devices.

The Planet POE-165S 802.3af/at to passive POE converter can be used to power non 802.3af/at devices via 802.3 POE.

Many devices on the market, including IP phones and wifi APs and devices, use a 12V or 24V power system and come with their own injectors.  POE-165S will allow you to power these devices using an existing 802.3 POE source.

Innovative Selectable DC Power Output Voltage
Via the innovative 12/19/24 volt DIP switch, the POE-165S can supply 12V/19V/24V DC power to the network devices, such as an outdoor wireless access point. It highly increases the flexibility of the product applications.


Easy Centralized Power Management
As the POE-165S can obtain power from IEEE 802.3af/at PoE switch/injector and supply the power to the remote device by passive PoE port, network administrator can remotely power off/on the remote device by the managed PoE switch/injector through the POE-165S.

Plug and Play, Easy Cabling Installation
With IEEE 802.3af/at Gigabit Power over Ethernet devices installed, the system administrator only has to use one single RJ-45 Ethernet cable to transmit both power and data to each device. Besides, by connecting the Industrial High Power PoE Injector with the POE-165S, you can also have the benefits of cost saving, easy networking planning and high network reliability.


  • 2-Port 10/100/1000Mbps RJ-45 interfaces
  • - 1-Port Data + Power output- 1-Port Data + 802.3af/at Power input

Standard Power over Ethernet Input Port

  • Complies with IEEE 802.3af/at Power over Ethernet PD

Passive Power over Ethernet Output Port

  • Non-IEEE 802.3af/at injector port
  • 1 DC 12V/19V/24V DIP switch
  • Power Output Pin: 4/5(+), 7/8(-)


  • Metal case
  • LED indicators for PoE-In LED and 12V/19V/24V Output Voltage LED

Standard Compliance

  • IEEE 802.3 10Base-T
  • IEEE 802.3u 100Base-TX
  • IEEE 802.3ab 1000Base-T
  • IEEE 802.3at High Power over Ethernet
  • IEEE 802.3af Power over Ethernet
  • FCC Part 15 Class A, CE
Hardware Specification
Interface PoE In Port: 1 x IEEE 802.3af/at RJ-45 STP / PD
Passive PoE Out Port: 1 x non-802.3af/at RJ-45 STP / PSE
LED Indicator System
 ● PoE In (Green)

Passive PoE Out 
 ● 12V (Green)
 ● 19V (Green)
 ● 24V (Green)
Network Cable 10Base-T: 2-Pair UTP Cat. 3, 4, 5
100Base-TX: 2-Pair UTP Cat. 3, 4, 5
1000Base-T: 2-Pair UTP Cat. 5, 5e, 6 
EIA/TIA-568 100-ohm STP
DIP Switch 12V/19V/24V DC Output Voltage
Power Input IEEE 802.3af/at Power over Ethernet End-Span / Mid-Span Class 4 PD
Power Output Maximum Passive PoE 
12V DC, 0.7A
19V DC, 0.7A
24V DC, 0.7A
Power Output Pin Assignment 4/5(+), 7/8(-)
Data Rate 10/100/1000Mbps
Maximum Distance Up to 100meters (Including POE-165S)
Dimensions (W x D x H) 94 x 70.3 x 26.2 mm
Weight 182g
Number of devices that can be powered 1
Operating Temperature -40 ~ 75 degrees C
Storage Temperature -40 ~ 85 degrees C
Operating Humidity 5 ~ 90%, Relative Humidity, non-condensing
Storage Humidity 5 ~ 90%, Relative Humidity, non-condensing
Compliant PLANET Outdoor Wireless Devices
2.4GHz WNAP-6306 (v2) @ 12V
5GHz WNAP-7206 @ 12V
WNAP-7300 @ 19V/24V
WNAP-7320 @ 12V/19V/24V
Standards Conformance
Standards Compliance IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 100Base-TX Fast Ethernet
IEEE 802.3ab 1000Base-T Gigabit Ethernet 
IEEE 802.3at High Power over Ethernet 
IEEE 802.3af Power over Ethernet
Regulation Compliance FCC Part 15 Class A, CE

Product Attachments

View FilePassive PoE Data Sheet    Size: (427.22 KB)

Data Sheet