Planet Wireless Outdoor Access Point - On Clearance


$89.00 +GST

Quick Overview

2.4Ghz 802.11n Outdoor AP with N-type RF connector

Multiple Operating & Wireless Modes
The WNAP-6308 supports multiple types of wireless communication connectivity (AP, Client CPE, WDS PtP, WDS PtMP, and Repeater) allowing for various application requirements and thus it gives users more comprehensive experience when accessing through Wireless LAN. It helps users to easily build a wireless network and extend the wireless range of the existing wireless network. Moreover, the WNAP-6308 also supports WISP mode, so CPE users could easily connect to Internet via WISP provider or connect to a wired network.

Advanced Security and Management
In aspect of security, besides 64/128- bit WEP encryption, the WNAP-6308 integrates WPA / WPA2, WPA-PSK / WPA2-PSK and 802.1x authority to secure and protect your wireless LAN. The wireless MAC filtering and SSID broadcast control consolidate the wireless network security and prevent unauthorized wireless connection. Furthermore, with the Dual-SSID feature you can set up two different wireless networks, the WNAP-6308 can therefore serve as a virtual access point for segmented networks tailored to any office or industrial need. With the SNMP-based management interface. The WNAP-6308 is also convenient to be managed and configured remotely.

Highly Reliable Outdoor Device
The WNAP-6308 is perfectly suitable to be installed in outdoor environments and exposed locations. Rated to operate at the temperature from -35 to 65 degrees C and adopted IP55 and outdoor UV Stabilized Enclosure, the WNAP-6308 can perform stably under rigorous weather conditions including heavy rain and wind. With the proprietary Power over Ethernet (PoE) design, the WNAP-6308 can be conveniently installed in the areas where power outlets are not available. It is the best way to use the WNAP-6308 to build outdoor wireless access applications between buildings on campuses, business and rural areas, etc.

Choose an antenna from our range of 2.4Ghz antennas.

Industrial Compliant Wireless LAN & LAN

  • Compliant with IEEE 802.11n wireless technology capable of up to 150Mbps data rate
  • Backward compatible with 802.11b/g standard
  • Equipped with 10/100Mbps RJ-45 LAN Port, Auto MDI / MDI-X supported

Fixed-network Broadband Router

  • Supported connection types: Dynamic IP / Static IP / PPPoE / PPTP / L2TP / IPSec
  • Supports Virtual Server, DMZ for various networking applications
  • Supports DHCP Server, UPnP, Dynamic DNS

RF Interface Characteristics

  • Built-in N-type Male Antenna Connector
  • High Output Power up to 200mW with multiply adjustable transmission power control

Outdoor Environmental Characteristics

  • IP55 Protection, UV Resistance
  • Passive Power over Ethernet design
  • Operating Temperature: -35 ~ 65 degrees C

Multiple Operation & Wireless Mode

  • Multiple Operation Modes: Bridge, Gateway, WISP
  • Multiple Wireless Modes: AP, Client CPE (WISP), WDS PtP, WDS PtMP, Repeater
  • Supports Dual-SSID allowing users to access different networks through one single AP
  • Supports WMM (Wi-Fi Multimedia)

Secure Network Connection

  • Supports Software Wi-Fi Protected Setup (WPS)
  • Advanced security: 64/128-bit WEP, WPA / WPA2, WPA-PSK / WPA2-PSK (TKIP/AES), and 802.1x Authentication
  • Supports NAT firewall features, with SPI function to protect against DoS attacks
  • Supports IP / Protocol-based access control and MAC Filtering

Easy Installation & Management

  • Web-based UI and Quick Setup Wizard for easy configuration
  • Remote Management allows configuration from a remote site
  • SNMP-based management interface
  • System status monitoring includes DHCP Client, System Log
Hardware Specifications
Hardware Specifications IEEE 802.11b/g/n Wireless LAN
IEEE 802.11i Wireless Security
IEEE 802.3 10Base-T Ethernet 
IEEE 802.3u 100Base-TX Ethernet
IEEE 802.3x Flow Control
Memory 32 Mbytes DDR SDRAM
8 Mbytes Flash
Interface Wireless IEEE 802.11b/g/n, 1T1R
LAN / WAN: 1 x 10/100Base-TX, Auto-MDI / MDIX
Antenna Built-in N-type (Male) Antenna Connector
Wireless RF Specifications
Wireless Technology IEEE 802.11b/g
IEEE 802.11n 
Data Rate IEEE 802.11b: 11, 5.5, 2 and 1Mbps
IEEE 802.11g: 54, 48, 36, 24, 18, 12, 9 and 6Mbps 
IEEE 802.11n (20MHz): up to 72Mbps 
IEEE 802.11n (40MHz): up to 150Mbps
Media Access Control CSMA / CA
Modulation Transmission/Emission Type: DSSS / OFDM 
Data modulation type: OFDM with BPSK, QPSK, 16-QAM, 64-QAM, 
Frequency Band 2.412GHz ~ 2.484GHz
Operating Channel America/ FCC: 2.414~2.462GHz (11 Channels)
Europe/ ETSI: 2.412~2.472GHz (13 Channels)
Japan/ TELEC: 2.412~2.484GHz (14 Channels)
RF Output Power (Max.) IEEE 802.11b/g: 23 ± 1.5dBm
IEEE 802.11n: 23 ± 1.5dBm
Receiver Sensitivity IEEE 802.11b/g: -95dBm
IEEE 802.11n: -91dBm
Output Power Control 3~23dBm
Software Features
LAN Built-in DHCP Server supporting static IP address distributing
Supports 802.1d STP (Spanning Tree)
WAN ■ Static IP
■ Dynamic IP
■ L2TP
■ IPSec
Operating Mode ■ Bridge 
■ Gateway 
Firewall NAT firewall with SPI (Stateful Packet Inspection)
Built-in NAT Server supporting Virtual Server and DMZ
Built-in Firewall with Port / IP Address / MAC / URL Filtering
Wireless Mode ■ AP
■ Client 
■ WDS Repeater (AP+WDS)
Channel Width 20MHz / 40MHz
Wireless Isolation Enables isolation of each connected wireless client from communicating with each other mutually
Encryption Type 64/128-bits WEP, WPA, WPA-PSK, WPA2, WPA2-PSK, 802.1X
Wireless Security Wireless LAN ACL (Access Control List) Filtering
Wireless MAC Address Filtering
Supports WPS (Wi-Fi Protected Setup )
Enable / Disable SSID Broadcast
Multiple SSID Up to 2
Max. Wireless Client 20
Max. WDS AP 8
Max. Wired Client 30
WMM (Wi-Fi Multimedia) Yes
QoS (Quality of Service) Yes
NTP(Network Time Management) Yes
Management Web UI, DHCP Client, Configuration Backup & Restore, Dynamic DNS, SNMP
Diagnostic Tool System Log, Ping Watchdog
Mechanical & Power
IP Rate IP55
Material Outdoor UV Stabilized Enclosure
Dimensions (Φ x H) 45 x 169 mm
Weight 128g
Installation Pole mounting
Power Requirements LAN: 12~24V DC, Passive PoE
   Pin 4,5 V DC+
   Pin 7,8 V DC-
Power Consumption 1.5W
Environment & Certification
Operating Temperature -35 ~ 65 degrees C
Operating Humidity 5 ~ 90% non-condensing
Regulatory CE / FCC / RoHS
Standard Accessories ■ Passive PoE Injector & Power Cord x 1
■ Plastic Strap x 2
■ Quick Installation Guide x 1
■ CD (User’s Manual, Quick Installation Guide) x 1