Two inches larger than the 7" models giving that extra amount of viewable space especially when viewing multiple cameras at the same time. Perfect for large cabs and applications where the monitor may be mounted at a further distance away from anoperator.
Touch Screen
The VT9HDQ monitor features full touch control. This allows easy selection of the required camera to be made full screen and then touch again to go back to a quad view. This saves pushing any buttons on the monitor to select the required view. Camera selection can also be made by the trigger inputs.
Picture Modes
Multiple picture modes can be selected including the following, Quad screen, single screen, split screen horizontal. A programmable "jump to" key can be programmed to select any of the available picture modes. Scan mode will auto cycle through all inputs at a preset time interval.
Suited for:
- mining and construction
- agriculture
- heavy road vehicles
- marine and port
Wide Dynamic Input Voltage Range
Features well designed DC circuitry primarily designed for 24V systems. A wide 10V-36V input range to handle voltage drops and spikes. Each camera output has smoothed 12V supply for perfect camera operation.
Included:
- monitor
- wiring loom
- dash mount
- infrared remote control
- U-Bracket (great for dash and overhead mounting)
-
flush mount kit
-
sun visor
-
manual
-
1 x RCA cable adaptor
-
Four video inputs displayable simultaneously
- touch corresponding quadrant to full screen camera, touch again to go back
-
high resolution digital monitor with daytime brightness
-
Each rear input also has a 12V output.
-
Each rear input has a power sensing trigger wire which when taken to a positive voltage will automatically select that view (door view, reversing camera etc)
- Split screen trigger wire
- Video Output
-
10V-32V dynamic voltage input range.
-
High quality shock resistant construction
- shatter proof to 2.83G
- touch buttons
- auto dimming LCD
|
Model VT9HDQ |
|
| Screen | 9" Digital touch screen panel with extra wide angle view and auto dimming |
| Camera inputs | 4 (each with audio and 12V power output) Camera input 3 has reverse grid overlay |
| Camera Triggers | 3 (10V-36V trigger for activating camera) |
| Colour System | PAL/NTSC Auto |
| Power Supply | 10V-32V DC |
| Outer Dimensions | 240mm(W) x 150mm(H) x 40mm(D) |
| Dot Pitch | 0.107h x .37v |
| Resolution | 400 x 272 |
| Contrast Ratio | 500:1 |
| Brightness | 400cd/m2 |
| Power Consumption | 12W |
| Button Lights | Auto illuminating touch buttons |
You may also be interested in the following product(s)
Product Attachments
 Viewtech 9" Quad Touch Screen Size: (283.84 KB) |
Brochure |