Viewtech Baler / Seeder Camera System


Quick Overview

Designed for agricultural applications including balers and seeders.

This high quality camera kit consists of a large Viewtech 9" Heavy duty touch screen monitor two heavy duty cameras and a trailer coupling unit. Great for balers, seeders and other agricultural machines that require two cameras views.  The monitor can be split screen, quad screen and picture in picture.  Up to four cameras can be added.


Touch Screen

The VT9HDQ monitor features full touch control.  This allows easy selection of the required camera to be made full screen and then touch again to go back to a quad view.  This saves pushing any buttons on the monitor to select the required view.   Camera selection can also be made by the trigger inputs.

Picture Modes

Multiple picture modes can be selected including the following, Quad screen, single screen, split screen horizontal.   A programmable "jump to" key can be programmed to select any of the available picture modes.   Scan mode will auto cycle through all inputs at a preset time interval.

Suited for:

  • balers
  • harvesters
  • seeders
  • forragers

Wide Dynamic Input Voltage Range

Features well designed DC circuitry primarily designed for 24V systems.  A wide 10V-36V input range to handle voltage drops and spikes.   Each camera output has smoothed 12V supply for perfect camera operation.


  • monitor
  • wiring loom
  • dash mount
  • infrared remote control
  • U-Bracket (great for dash and overhead mounting) 
  • flush mount kit
  • sun visor
  • manual
  • 1 x RCA cable adaptor


  • Four video inputs displayable simultaneously
  • touch corresponding quadrant to full screen camera, touch again to go back
  • high resolution digital monitor with daytime brightness
  • Each rear input also has a 12V output.
  • Each rear input has a power sensing trigger wire which when taken to a positive voltage will automatically select that view (door view, reversing camera etc)
  • Split screen trigger wire - can trigger slit screen by switch or other electrical activation
  • Video Output
  • 10V-32V dynamic voltage input range.
  • High quality shock resistant construction
  • shatter proof to 2.83G
  • touch buttons
  • auto dimming LCD
  • super wide 160 degrees viewing angle
  • built in automatic heater
  • IP69K water proof rating (this rating allows the camera to be pressure washed)
  • 5m night vision range
  • mirror/normal selector on the back
  • sensitive audio pickup
  • EasyConenct 4 pin waterproof connection with rubber gromet on cable tail.

Model VT9HD

Screen 9" Digital touch screen panel with extra wide angle view and auto dimming
Camera inputs 4 (each with audio and 12V power output) Camera input 3 has reverse grid overlay
Camera Triggers 3 (10V-36V trigger for activating camera)
Colour System PAL/NTSC Auto
Power Supply 10V-32V DC
Outer Dimensions 240mm(W) x 150mm(H) x 40mm(D)
Dot Pitch 0.107h x .37v
Resolution 400 x 272
Contrast Ratio 500:1
Brightness 400cd/m2
Power Consumption 12W
Button Lights Auto illuminating touch buttons


Camera Specifications

Resolution 420 TVL or 512 x 582 pixels.
Image Sensor Sharp 1/3" CCD
Colour System PAL
Viewing Angle 160°
Min Illumination 0.0Lux
Heater Built in Heater for demisting/fogging and cold usage.
Colour System PAL/NTSC Auto
Infrared Automatic Day/Night mode 5m Illumination
Audio Yes (sensitive microphone built in)
Video Output 1.0Vp-p 75 Ohms
Electronic Shutter 1/50 to 1/100000 sec
AGC Auto
Signal to Noise Ratio >48dB
White Balance Auto
Voltage 12V DC (Voltage is converted by monitor is using 24V System)
Current 400mA max
Size 86 x 72 x 75
Cable Tail 300mm

Product Attachments

View FileViewtech 9" Agricultural Camera Kit    Size: (354.88 KB)


View FileViewtech Seeder Bailer Camera Kit    Size: (283.17 KB)

Data Sheet