Constructed of aluminium this camera is suitable for any type of vehicle blind spot application.
Perfect for material handling and forklift applications as the camera is small and can be mounted on forks, rails, ledges or voids on any vehicle.
The camera module is recessed and gives a 45° field of view which is ideal for looking towards the end of forks. The module can alos be rotated so that the aluminium housing can be mounted on any angle.
-
45° field of view
-
high resolution
-
aluminium housing
-
rotateable camera module
-
IP67
-
Viewtech EasyConnect 4 pin waterproof connection with rubber gromet on cable tail
Image Device | CMOS |
TV System | PAL/NTSC |
Effective Pixels | 640×480 pixels |
Sensing Area | 4.077mm×3.136mm |
Scanning System | 2:1 Interlace |
Sync. System | Internal |
Horizontal Sync Frequency | 15.625 kHz/15.734 kHz |
Vertical Sync Frequency | 50Hz/60Hz |
Video Output | 1.0Vp-p, 75Ohm |
Gamma Consumption | 0.45 |
AGC | Auto |
S/N Ratio | Better than 46dB |
White Balance | Auto |
Electronic Shutter | Auto:1/60(NTSC)/1/50(PAL)~1/100,000 Seconds |
BLC | Auto |
Operating Temperature | –20℃ ~ 70℃, RH95%MAX. |
Storage Temperature | –40℃ ~ 80℃, RH95%MAX. |
Minimum Illumination | 0Lux |
Power Supply | DC12V |
Lens | f=4.2mm |
Viewing Angle | 45° |